No Bake Ceramic Paint - Hampton Blue
$12.99
A Makers' Studio No Bake Ceramic paint lays a rich, permanent color on ceramic and glass surfaces and it's food safe!
~section 2~
What You'll Love
Create your own custom dishes, vases, and glasses with vibrant pops of color (best on ceramic, porcelain, vases, glass, jars or fine china). It's so easy! Just apply it to your surface with your favorite A Makers' Studio stencils or you can even water it down to use as a watercolor! This medium is food safe and microwave safe. For best results hand wash only. Join in the fun of customizing platters, dishes, vases, glasses, etc. The possibilities are endless!
How to use:
-
Clean your surface before application and make sure it is completely dry.
-
Place your stencil or lay-out your freehand design. Make sure that there are no bubbles if using a Mesh Stencil, or the medium will go under.
-
Use a ChalkArt Spreader or firm brush to push the paint through the mesh in the stencil - it must get through the mesh and not just sit on top of it.
-
Peel the stencil and immediately wash it. If there are any spots with bleed or you went over the stencil edge, remove these with a wet q-tip. Allow the no bake ceramic paint to dry for 12 - 14 hours. If you want to speed up the cure time of your piece and give it more durability, we recommend baking your piece. Bake for 25 minutes on 350 degrees, let the piece cool down in the oven.
Description
A Makers' Studio No Bake Ceramic paint lays a rich, permanent color on ceramic and glass surfaces and it's food safe!
~section 2~
What You'll Love
Create your own custom dishes, vases, and glasses with vibrant pops of color (best on ceramic, porcelain, vases, glass, jars or fine china). It's so easy! Just apply it to your surface with your favorite A Makers' Studio stencils or you can even water it down to use as a watercolor! This medium is food safe and microwave safe. For best results hand wash only. Join in the fun of customizing platters, dishes, vases, glasses, etc. The possibilities are endless!
How to use:
-
Clean your surface before application and make sure it is completely dry.
-
Place your stencil or lay-out your freehand design. Make sure that there are no bubbles if using a Mesh Stencil, or the medium will go under.
-
Use a ChalkArt Spreader or firm brush to push the paint through the mesh in the stencil - it must get through the mesh and not just sit on top of it.
-
Peel the stencil and immediately wash it. If there are any spots with bleed or you went over the stencil edge, remove these with a wet q-tip. Allow the no bake ceramic paint to dry for 12 - 14 hours. If you want to speed up the cure time of your piece and give it more durability, we recommend baking your piece. Bake for 25 minutes on 350 degrees, let the piece cool down in the oven.