WoodCast

Remove only what you need. Reseal the container tightly to keep the rest fresh.

Add a tiny touch of acetone and knead for extra pliability.

Use your hands, a palette knife, or any silicone mold. Press firmly for maximum detail.

Dry time varies — typically 4–6 hours, or overnight for thicker pieces.

Sand, carve, drill, paint, glaze, or antique using any Amy Howard at Home products.

Clay shrinks, cracks, and cannot be sanded or carved realistically once dry. WoodCast™ is true wood fiber — it behaves exactly like wood and gives you architectural-quality detail without the fragility or inconsistency of clay.

Acrylic resin cures into a hard plastic, which cannot be sanded, carved, stained, or bent once cured.

WoodCast is not plastic.

• It sands like wood
• It carves like wood
• It stains like wood
• It paints like wood
• It can be warmed and shaped
• It bonds seamlessly to wood surfaces

It is the closest thing to authentic carved wood you can make in a mold.

WoodCast™ will stay fresh for up to 12 months when stored properly:

• Keep it sealed in its plastic bag
• Close the container tightly
• Only remove the amount you need, then reseal immediately

Revive it by misting it with acetone (never water). Blend well until it becomes soft and pliable again before pressing into your mold.

Use wood glue or super glue depending on the surface.After applying glue to the back of your appliqué, tape it in place while it dries to secure a perfect, seamless fit onto your piece.

Yes — beautifully.
After drying your appliqué overnight:

1. Place it in the microwave for 30 seconds.
2. Remove carefully — it will be warm and flexible.
3. Shape it around curved surfaces such as legs, frames, and moldings.
4. Apply glue to the back and tape it securely until fully bonded.

This is one of WoodCast’s greatest advantages over resin or clay.

Yes. It sands like raw wood, allowing you to refine edges or blend the appliqué into your surface seamlessly.

Absolutely. You can carve additional detail, refine lines, and create deeper cuts just like you would with wood.

Yes — beautifully. Because it is true wood fiber, it absorbs stain naturally for a rich, authentic finish.

Yes.If you are lacquering your appliqué, prime it first, as WoodCast™ absorbs paint like raw wood.

• Overnight is ideal for maximum hardness.

In a hurry? Let it dry 2–4 hours, gently demold, and finish drying flat.

No. WoodCast™ does NOT shrink in the mold, unlike many clays.

No — WoodCast™ releases easily from high-quality silicone molds.

Yes. Use a craft knife, utility knife, or small saw. It cuts like soft wood.

Yes, if finished with an exterior-rated sealer or paint.

Absolutely. WoodCast™ is extremely forgiving and perfect for:

• Furniture artists
• Upcyclers
• DIYers
• Interior decorators
• Mixed media artists
• Anyone wanting architectural-quality detail at home

• Sandpaper (120–320 grit)
• Carving tools
• Utility knives
• Dremel tools
• Fine files and sculpting tools

You can reach out to us any time.